Hans Low Power Lasers
Canada and Mexico Territories
Bell Lasers LLC
ph: 800-385-6760
info
Belt Driven Laser Cutting Machines
Belt driven laser cutting machines are widely used for a variety of cutting applications. The machines comes in table sizes, choice of laser types and power levels, and configurations. The most widely sold laser machines on the market are belt drive systems, for their ability to do the job at the lowest cost.
Belt drive machines are the fastest drive mechanisms. The belt is lightweight and can move a gantry or laser focus head at high speed. Over time, the belt may stretch and require replacement or tightening to get back to the original accuracy.
Please select your laser type first, then choose among the variety of belt drive laser machines below.CB1206-XXXE, CO2 Laser Cutting Machine
This CO2 laser cutting machines comes with a large bed for XY, belt drive motion, and an electronically adjustable height. The table can be moved up and down prior to starting the cut pattern.
Laser power: 30W/50W/55W/100W/150W Cutting range: 1200mm×600mm Cutting speed (mm/sec): 0-300 Positioning repetition accuracy:
≤±0.05mmPositioning accuracy:
≤±0.1mmWorking mode: Engraving and cutting of lattice
Optical structure: Flying optical path Cooling system: Laser power 30W/55W:air cooling
Laser power 30W/50W/55W/100W:water coolingSupply voltage: Laser power 30W:single phase 220VAX, 50/60HZ,30A
Laser power 50W/55W: single phase 220VAX, 50/60HZ,40A
Laser power 100W/150W: single phase 220VAX, 50/60HZ,50ACB0906-XXXE Laser Cutting Machine
The CO2 laser cutting machine offers 900mm x 600mm cutting area (36" x 24"). It comes with a variety of laser powers.
Laser power: 30W/50W/55W/100W/150W Cutting range: 900mm×600mm Cutting speed (mm/sec): 0-300 Positioning repetition accuracy:
≤±0.05mmPositioning accuracy:
≤±0.1mmWorking mode: Engraving and cutting of lattice
Optical structure: Flying optical path Cooling system: Laser power 30W/55W:air cooling
Laser power 30W/50W/55W/100W:water coolingSupply voltage: Laser power 30W:single phase 220VAX, 50/60HZ,30A
Laser power 50W/55W: single phase 220VAX, 50/60HZ,40A
Laser power 100W/150W/200W: single phase 220VAX, 50/60HZ,50ACB0805-XXXE High Precision CO2 Laser Machine
This CO2 laser provides the highest precision available for belt drive machines, employing servo motors, German made linear rails. The laser provided is an imported metal tube laser providing radio frequency power adjustment for maximum laser power output precision.
Laser power: 30W/55W/55W/100W Cutting range: 500mm×300mm/800mm×500mm Max. workpiece (W×L×H): 520×320×180 Cutting speed (mm/sec): 0-400 Positioning repetition accuracy:
≤±0.05mmPositioning accuracy:
≤±0.1mmWorking mode: Engraving and cutting of lattice
Optical structure: Flying optical path Cooling system: Air cooling Supply voltage: Laser power 30W:single phase 220VAX, 50/60HZ,30A
Laser power 50W/55W: single phase 220VAX, 50/60HZ,40A;
Laser power 100W: single phase 220VAX, 50/60HZ,50A
Belts are used to transfer motion from the motor to the gantry and laser focus head. Belts respond immediately to the motor and can provide high speed motion. The laser can cut and pulse at high speeds as well, making it a good match for belt drives. The belts, typically rubber molded around a high strength fabric like Kevlar (registered Dupont), take a long time to stretch. In some machines there is built in room for adjustment to tighten the belt. In other machines, the belt is simply replaced.
Lead screws are more precise, and precise over time than belts, though their speed is much slower and cost higher.
Bell Lasers LLC
ph: 800-385-6760
info
