Hans Low Power Lasers
Canada and Mexico Territories
Bell Lasers LLC
ph: 800-385-6760
info
Mark While Moving
CO2 Lasers are used to mark parts while they are moving on a production line. CO2 lasers have often replaced ink technology because the laser is reliable and requires little maintenance.
CO2 lasers mark parts and products in a variety of industries including automotive, construction, electronics, and more.
CO2-CS10/CS30/CS50, CO2 Laser Mark While Moving
With your choice of laser powers to meet the speed requirements, the CO2 Laser Markers are designed for the production line. The enclosure provides a safe, clean, housing for the laser and its components. The simple user interface is made with the operator in mind. And, adequate input/output ports are available for proper synchronization with your process.
Laser wavelength: 10.6um Average power: 10W Output stability: ±5% Repetition accuracy: <20kHz Marking area:
60mm×60mm Focal distance: 100mm Content output: Text, Pattern Operating system: Microsoft Windows XP (Chinese, English) Marking lines: 1-10 lines Marking character per second: 700/s Max. manufacturing line speed: 70m/min Character height: ≥0.25mm Min. line width: 0.07mm Character: Support all kinds of TTF fonts and some simple single line fonts Storage temperature: -10℃-65℃ Operating temperature: -5℃-45℃ Relative moisture: 10%-90%, no fog Overall power consumption: 500W
Supply voltage: AC220V single phase/50Hz/3.5A Cooling mode: Air cooling Dimensions
(L×W×H)
Main control case: 363mm×320mm×955mm Ascending stage: 380mm×300mm×1180mm Main beam: 770mm×135mm×192mm
Parts moving down a production line can be properly coordinated with the laser marking system. Whether it be line speed, edge detection with an on signal, the laser marking station can be synchronized in some manner to properly mark parts while moving.Bell Lasers LLC
ph: 800-385-6760
info
